Two-Step Paint Correction Kit - (Cut + Finish)

Full correction: cut the defects, finish to a showcar gloss

The Two-Step Correction Kit pairs Pure Cut for fast defect removal with Perfect Polish for high-clarity finishing. Dialed pad pairings make the process predictable on most clears with a DA polisher.

What’s inside

• Pure Cut (16 oz) + Perfect Polish (16 oz)
• Pads: MF Cutting (ETH-MCP-5) ×2, Orange (ETH-OPP-5) ×2, Black (ETH-BFP-5) ×1
• Towels: Plush 470 – Gray ×3

Why it works

• Step 1: Microfiber + Pure Cut to level moderate/heavy swirls and RIDS.
• Step 2: Orange + Perfect Polish to refine; optional jewel with black pad.
• Low dust, easy wipe-off so you can move quickly panel to panel.

How to use

1. Decon wash & clay; tape sensitive trim.
2. Cut: MF + Pure Cut, speed 4–5, moderate pressure, 2–3 section passes; wipe.
3. Finish: Orange + Perfect Polish; reduce pressure for final slow pass; wipe.
4. Optional: Black pad + a small amount of Perfect Polish to jewel.
5. Panel-wipe and protect with Resist or your ceramic coating.

Good to know

• Not for matte/satin paint or PPF. Always test a small section first.
• Deep through-clear scratches won’t fully remove by polishing alone.